International 7400 CXT - The ultimate Expedition Vehicle - 4x4 off road...

Amerigo International —

http://www.unicat.net/

This is the ultimate family Expedition Vehicle. It offers a breakthrough level of capability, range, safety, reliability, luxury, and space.

UNICAT offers the 7400 chassis in factory built regular, extended or crew cab in 4X4 or 6X6 configurations. Four body sizes are available - 193", 205", 217", and 228". Wheel bases are offered in 177", 183", 193", 195", 213", 226", 232", 244", and 250". All body sizes are available on all cab configurations. Variations impact dimensions of the kitchens, bathrooms, and seating areas. Straight back models may be fitted with motorcycle racks.

Cab

Upgraded cab - leather & wood trim, additional insulation

SS fire extinguisher at floor on left side of driver seat

Seats - adjustable air suspension front

Cab rear suspension air bag type

Power windows & doors w/remote control

Full gauges & instrumentation

Cobra CB radio

Alpine CDA-9857 AM FM XM CD Ipod stereo system

GPS Garmin 7500 w/rear view camera and weather fax

Chassis



International 7400 4x4

Extended cab - Overall length 372, width 98, height 144

GVWR 33,000 lb, GCVWR - 80,000 lb

Wheelbase 213 (5410 mm), cab-to-axle 112, axle-to-frame 75

Frame rails heat treated alloy steel 120,000 lb psi, 10.866 X 3.622 X 0.433 (276mm X 92mm X 11.1mm)

DT570 50-state, 310 hp, 950 lb-ft torque @ 1200 rpm, #2 bell housing

8 mpg @ 60 mph

Chassis batteries 2 X 210 ah AGM marine

Supplemental alternator 90a with I-U charging regulator for body

Engine block heater Phillips 120v/1250w, located below drivers door

Air compressor Bendix TU-FLO 550, 13.2 cf quick connects front and rear

Allison 3000 RDS P close ratio, 6-speed w/overdrive

Transfer case Meritor T-4210, 2-speed, 10,000 lb w/provision for PTO

All wheel drive, engageable

Front axle - Meritor MX-12-120 single reduction, 12,000 lb

Rear axle - Meritor RS-21-145 single reduction, wide track, 21,000 lb w/driver controlled main locking differential, 200 series wheel ends and ABS gear ratio: 5.13

Air brake ABS Bendix antilock brake system, 4-channel

Front brakes air cam, S-cam, 16.5 X 5.0 inc 20 sq in MGM long stroke brake chambers

Rear brakes air cam 16.5 X 7.0 inc MGM TR3030 long stroke brake chamber and HD spring actuated parking brake

Exhaust brake D Logic, electronically activated

Air dryer Bendix AD-IP with heater

Alcoa 22.5 aluminium wheels

Michellin XZL 445/65R22.5

Fuel tanks 2 X 120 gal w/ 9mm skid plates (approximately 2,000 mi range)

Racor fuel prefilters w/ water separators/heaters

SS roof rack in-motion TV antenna, generator cooling system, work lights, and 4 X Hella 2100 HID lights

SS wire mesh head lights brush & stone guards

Winches hydraulic 15,000 lb front & rear w/15 gal reservoir and PTO pump

Rear bumper - SS fold-down under-ride protection

Water fording - all breather tubes raised to minimum 5, positive pressure in generator compartment, sealed storage compartments

Generator 8kw Fischer Panda

Spare - rear mounted w/manual hoist

Rear rack manual hoist, adaptable for storage, inflatable boat/outboard, bicycles or motorcycle